Published Papers

1.             Yongqing Huang, John J. McCormick and James Economy. “Adhesion of an aromatic thermosetting copolymester with copper”. Submitted to Polymers for Adv. Tech. (2004)

2.             Wei Xiao, Christian Fisher, Brian D. Fabio and James Economy, “A new family of lubricants based on sterically hindered aliphatic polyester”, Submitted to Wear. 2004

3.             John P. Voyles, Zhongren Yue, James Economy and Gary Bordson . “Removal of Chlorinated Solvents from Water Using Tailored Activated Carbon on Fiberglass” submitted to Water Research 2004

4.             K. Xu,  J. C. Selby, M. A. Shannon, and J. Economy. “Adhesion mechanisms in the solid state bonding technique using sub-micrometer aromatic thermosetting copolyester adhesive”. J.of Applied Polymer Science. (2004) in press

5.             K. Xu  and J. Economy. “Nature of pore formation using reaction byproducts in aromatic thermosetting copolymers”. Submitted to Polymers for Adv. Tech. (2004)

6.             K. Xu,  M. A. Shannon,  and J. Economy. “Phase separation and surface segregation in thin film blends of polyimides and aromatic thermosetting copolyesters”. Submitted to Macromolecules. (2004)

7.             K. Xu, J. Economy, and D. Wang. “Hyperbranched thermoseting poly(imide-ester)s: Synthesis, properties, and applications”. Submitted to Macromolecules. (2004)

8.             Chunqing Liu and James Economy, “Advanced mesoporous organosilica material containing microporous cyclodextrins for the removal of humic acid from water”, Journal of Chromatography A, 2004, in press.

9.             Chunqing Liu, Lei Fu and James Economy, “Synthesis and characterization of a novel calix[4]arene-based periodic mesoporous organosilica”, Macromolecular Rapid Communications, 25, 804-807. (2004)

10.         Chunqing Liu, Jinfeng Wang and James Economy, “Synthesis and characterization of a novel, mesoporous organosilica with additional cyclodextrin-based micropores”, Macromolecular Rapid Communications, 25, 863-866. (2004)

11.         Todd Martin and James Economy, “Ultra High Strength Metal Matrix Composites”, Materials Science & Technology 2003, General Poster Session, November 9-12, 2003, Chicago, IL

12.         Liu, Chunqing; Fu, Lei; Economy, James. “A simple, template-free route for the synthesis of mesoporous titanium dioxide materials”.  Journal of Materials Chemistry  14(7),  1187-1189. (2004),  

13.         Liu, Chunqing; Naismith, Nathaniel; Huang, Yongqing; Economy, James.   “Synthesis and characterization of novel hyperbranched poly(imide silsesquioxane) membranes”.     Journal of Polymer Science, Part A: Polymer Chemistry  41(23), 3736-3743.  (2003),

14.         Dominguez, Lourdes; Economy, James; Benak, Kelly; Mangun, Christian L.. “Anion exchange fibers for arsenate removal derived from a vinylbenzyl chloride precursor”.     Polymers for Advanced Technologies  14(9),  632-637. (2003), 

15.         Liu, Chunqing; Naismith, Nathaniel; Fu, Lei; Economy, James.  “Ordered mesoporous organic-inorganic hybrid materials containing microporous functional calix[8]arene amides”.  Chemical Communications (19), 2472-2473. (2003),   

16.         Huang, Yongqing; Economy, James. “Chemical interactions at the interface of an aromatic thermosetting copolyester (ATSP) and Zn-coated Cu foil”. Polymeric Materials Science and Engineering  89  545-546.  (2003),

17.         Liu, Chunqing; Economy, James. “Novel membranes prepared from the reaction of hyperbranched polyimide and epoxy silane”. Polymeric Materials Science and Engineering  89  444-445. (2003), 

18.         Liu, Chunqing; Huang, Yongqing; Naismith, Nathaniel; Economy, James; Talbott, Jonathan. “Novel Polymeric Chelating Fibers for Selective Removal of Mercury and Cesium from Water”.   Environmental Science and Technology  37(18),  4261-4268.  (2003), 

19.         Huang, Yongqing; Economy, James. “Chemical interactions at the interface of an aromatic thermosetting copolyester (ATSP) and Zn-coated Cu foil”. Abstracts of Papers, 226th ACS National Meeting, New York, NY, United States, September 7-11, 2003  (2003),   PMSE-332. 

20.         Liu, Chunqing; Economy, James. “Novel membranes prepared from the reaction of hyperbranched polyimide and epoxy silane”   Abstracts of Papers, 226th ACS National Meeting, New York, NY, United States, September 7-11, 2003  (2003),     PMSE-279. 

21.         Yue, Zhongren; Pripusich-Sienkiewicz, Katherine E.; Economy, James. “Synthesis and characterization of porous inorganic fibers templated from ACF's.”  Preprints of Extended Abstracts presented at the ACS National Meeting, American Chemical Society, Division of Environmental Chemistry  (2003),  43(2),  432-437. 

22.         Xiao, Wei; Economy, James.   “Highly effective bactericides based on silver coated fiber glass”. Preprints of Extended Abstracts presented at the ACS National Meeting, American Chemical Society, Division of Environmental Chemistry  (2003),  43(2),  421-425.   

23.         Liu, Chunqing; Economy, James.    “Novel polymeric chelating fibers”.  Preprints of Extended Abstracts presented at the ACS National Meeting, American Chemical Society, Division of Environmental Chemistry  (2003),  43(2),  415-420. 

24.         Yue, Zhongren; Mangun, Christian L.; Economy, James. “Surface chemistry of poly(vinyl alcohol) coated fiberglass activated with H3PO4.”  Preprints of Extended Abstracts presented at the ACS National Meeting, American Chemical Society, Division of Environmental Chemistry  (2003),  43(2),  408-414. 

25.         Economy, James; Yue, Zhongren  “Recent progress on advanced adsorption systems for removal of trace contaminants in water”.  Preprints of Extended Abstracts presented at the ACS National Meeting, American Chemical Society, Division of Environmental Chemistry  (2003),  43(2),  399-403. 

26.         Ince, Jeffrey S.; Economy, James  “Design of greatly improved ion exchange materials in the form of fibers”. Preprints of Extended Abstracts presented at the ACS National Meeting, American Chemical Society, Division of Environmental Chemistry  (2003),  43(2),  370-374. 

27.         Liu, Chunqing; Naismith, Nathaniel; Fu, Lei; Economy, James.  “Novel nanoporous hybrid organic-inorganic silica containing iminodiethanol chelating groups inside the channel pores”.  Chemical Communications  (15),  1920-1921 (2003),  

28.         Yue, Zhongren; Economy, James; Mangun, Christian L.    “Preparation of fibrous porous materials by chemical activation. 2. H3PO4 activation of polymer coated fibers”.     Carbon  41(9),  1809-1817. (2003),  

29.         Kim, Tae-Young; Yeon, Ik-Jun; Baek, Ill-Hyun; Nam, Ki-Chang; Economy, James  “Manufacture of activated carbon fiber assemblies filter using the glass fibers and their adsorption performance”.  Kongop Hwahak  14(1),  61-68.  (2003), 

30.         Liu Chunqing; Naismith Nathaniel; Fu Lei; Economy James    “Ordered mesoporous organic-inorganic hybrid materials containing microporous functional calix[8]arene amides”.     Chemical communications (19),  2472-3.  (2003) 

31.         Liu Chunqing; Naismith Nathaniel; Fu Lei; Economy James    Novel nanoporous hybrid organic-inorganic silica containing iminodiethanol chelating groups inside the channel pores.     Chemical communications (15),  1920-1.  (2003 )

32.         L. Dominguez, Z. Yue,  J. Economy, and C. L. Mangun.  “Design of polyvinyl alcohol mercaptyl fibers for arsenite chelation”. Reactive & Functional Polymers 53(2-3), 205-215. (2002)

33.         Z. Yue, C. L. Mangun, and J. Economy. “Preparation of fibrous porous materials by chemical activation. 1. ZnCl₂ activation of polymer-coated fibers”. Carbon 40(8), 1181-1191. (2002).

34.         J. Economy, L. Dominguez, and C. L. Mangun. “Polymeric ion-exchange fibers”. Industrial & Engineering Chemistry Research 41(25), 6436-6442. (2002).

35.         Z. Yue and J. Economy.  “CO₂ adsorption using PAN-based porous materials on fiber glass”, AIChE. 2002 Spring National Meeting,  New Orleans, March 11, (2002)

36.         K. R. Benak, L. Dominguez, J. Economy, and C. L. Mangun. “Sulfonation of pyropolymeric fibers derived from phenol-formaldehyde resins”. Carbon 40(13), 2323-2332. (2002).

37.         Z. Yue, C. L. Mangun, J. Economy, P. Kemme, D. Cropek, and S. Maloney. “Removal of chemical contaminants from water to below USEPA MCL using fiber glass supported activated carbon filters”. Environmental Science and Technology 35(13), 2844-2848. (2001).

38.         Y-Q. Sun and J. Economy. “Teaching engineers materials selection via the internet: the issue of diverse students backgrounds”. Journal of materials Education. 22, 53. (2001)

39.         J. C. Selby, M. A. Shannon, K. Xu, and J. Economy. “Sub-micrometer solid-state adhesive bonding with aromatic thermosetting copolyesters for the assembly of polyimide membranes in silicon-based devices”. Journal of Micromechanics and Microengineering 11(6), 672-685. (2001).

40.         C. L. Mangun, Z. Yue, J.  Economy, S.  Maloney, P. Kemme, and D. Cropek. “Adsorption of organic contaminants from water using tailored ACFs”. Chemistry of Materials 13(7), 2356-2360. (2001).

41.         C. L. Mangun, J. A. DeBarr, and J. Economy. “Adsorption of sulfur dioxide on ammonia-treated activated carbon fibers”. Carbon 39(11), 1689-1696. (2001).

42.         C. L. Mangun, K. R. Benak, J. Economy, and K.L. Foster. “Surface chemistry, pore sizes and adsorption properties of activated carbon fibers and precursors treated with ammonia”. Carbon 39(12), 1809-1820. (2001).

43.         A. Lopez  and J. Economy. “Solid state bonding of graphite/thermoset composites via interchain transesterification reaction (ITR)”. Polymer Composites 22(3), 444-449. (2001).

44.         J. Economy and K. Xu. “A new family of high-temperature aromatic copolyester thermosets: Polyimides and other high temperature polymers”. Coronet Books Vol. 1, pp.1-9. Ed. K. L. Mittal, Oct. (2001)

45.         T. Du, M. Liu, S. Seghi, K.J. Hsia, J. Economy, and J.K. Shang. “Piezoelectric actuation of crack growth along polymer-metal interfaces in adhesive bonds”. Journal of Materials Research 16(10), 2885-2892. (2001).

46.         T. Du, M. Liu, S. Seghi, K.J. Hsia, J. Economy, and J.K. Shang. “New technique for determining mechanical property of polymer/metal interface”. Materials Research Society Symposium Proceedings 661(Filled and Nanocomposite Polymer Materials), KK5.1/1-KK5.1/6. (2001).

47.         L. Dominguez, K. R. Benak, and J. Economy. “Design of high efficiency polymeric cation exchange fibers”. Polymers for Advanced Technologies 12(3-4), 197-205. (2001).

48.         K. Xu, J. Economy, and M. A. Shannon.  “A general purpose adhesive for microelectronic devices”. International Journal of Microcircuits and Electronic Packaging 23(1), 78-84. (2000).

49.         J. Economy. “Polymers as an integral part of a materials science and engineering curriculum”. Book of Abstracts, 219th ACS National Meeting, San Francisco, CA, March 26-30, 2000.  POLY-373. (2000).

50.         A. C. Hall and J. Economy. “Preparing high- and low-aspect ratio AlB2 flakes from borax or boron oxide”. JOM 52(2), 42-44. (2000).

51.         A. C. Hall and J. Economy. “A new discontinuously reinforced aluminum metal matrix composite (MMC): Al + AlB2 flakes”. State of the Art in Cast Metal Matrix Composites in the Next Millenium, Proceedings of a Symposium at the 2000 TMS Fall Meeting, St. Louis, MO, United States, Oct. 8-12, 2000.  273-281. (2000).

52.         A. Hall, and J. Economy. “The Al(L) + AlB12 .tautm. AlB2 peritectic transformation and its role in the formation of high aspect ratio AlB2 flakes”. Journal of Phase Equilibria 21(1), 63-69. (2000).

53.         K.R. Benak, L. Dominguez, J. Economy, C.L. Mangun, and Z. Yue. “Control of organic/inorganic contaminants utilizing tailored activated carbon fibers”. Proceedings - Annual Conference, American Water Works Association , 2157-2172. (2000).

54.         C. L. Mangun, R. D. Braatz, J. Economy, and A.J. Hall. “Fixed bed adsorption of acetone and ammonia onto oxidized activated carbon fibers”. Industrial & Engineering Chemistry Research 38(9), 3499-3504. (1999).

55.         C. L. Mangun, K.R. Benak, M.A. Daley, and J. Economy. “Oxidation of activated carbon fibers. Effect on pore size, surface chemistry, and adsorption properties”. Chemistry of Materials 11(12), 3476-3483. (1999).

56.         Y-C. Kim and J. Economy. “The mechanical properties of thermally treated 73/27 HBA/HNA copolyester”. Polymers for Advanced Technologies 10(8), 493-500. (1999).

57.         Y-C. Kim and J. Economy. “The effect of branching on the physical properties of 73/27 4-hydroxybenzoic acid/2-hydroxy-6-naphthoic acid”. Polymers for Advanced Technologies 10(9), 535-543. (1999).

58.         Y-C. Kim and J. Economy. “The degradation process observed during step annealing of 73/27 HBA/HNA copolyester”. Macromolecules 32(9), 2855-2860. (1999).

59.         D-P. Kim, K-T. Moon, J-G. Kho, J. Economy, C. Gervais, and F. Babonneau. “Synthesis and characterization of poly(aminoborane) as a new boron nitride precursor”. Polymers for Advanced Technologies 10(12), 702-712. (1999).

60.         J. Economy and C. L. Mangun. “Design of new materials for environmental control”. Macromolecular Symposia 143(World Polymer Congress, 37th International Symposium on Macromolecules, 1998), 75-79. (1999).

61.         J. Economy. “Polymers as an integral part of a materials science and engineering curriculum”. Polymer International 48(10), 941-943. (1999).

62.         J. Economy  and C. L. Mangun. “Design of high efficiency, low cost activated carbon fibers for chemically protective masks/clothing”. Proceedings of the ERDEC Scientific Conference on Chemical and Biological Defense Research, Aberdeen Proving Ground, MD, United States, Nov. 17-20, 1998.  365-371. (1999).

63.         J. Economy, L.A. Schneggenburger, and D. Frich.  “Interchain transesterification reactions in copolyesters”. Transreactions in Condensation Polymers.  195-217. (1999).

64.         F. F. Shi and J. Economy. “Thermomechanical studies on newly developed copolyester thin films. Part II: thermal and intrinsic stress”. Polymer Engineering and Science 38(6), 971-975. (1998).

65.         F. F. Shi and J. Economy. “Thermomechanical studies on newly developed copolyester thin films. Part I: Thermal expansion coefficients”. Polymer Engineering and Science 38(3), 499-504. (1998).

66.         F. F. Shi and J. Economy. “Surface characterizations on newly developed copolyester thin films for microelectronics devices”. Journal of Vacuum Science & Technology, B: Microelectronics and Nanometer Structures 16(1), 125-130. (1998).

67.         F. F. Shi and J. Economy. “Moisture transport studies on newly developed aromatic and aromatic/aliphatic copolyester thin films”. Journal of Polymer Science, Part B: Polymer Physics 36(6), 1025-1035. (1998).

68.         C. L. Mangun, M. A. Daley, R. D. Braatz, and J. Economy. “Effect of pore size on adsorption of hydrocarbons in phenolic-based activated carbon fibers”. Carbon 36(1-2), 123-129. (1998).

69.         D. Frich, A. Hall, and J. Economy. “Nature of adhesive bonding via interchain transesterification reactions (ITR)”. Macromolecular Chemistry and Physics 199(5), 913-921. (1998).

70.         J. Economy and C. L. Mangun. “Design of a high efficiency, low cost activated carbon fiber system for removal of trace contaminants”. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry 43(4), 880-884. (1998).

71.         J. Economy and L.A. Schneggenburger. “Solid-state interchain transesterification reactions in macromolecules”. Macromolecular Symposia 128(International Symposium on New Approaches in Polymer Synthesis and Macromolecular Formation, 1997), 1-12. (1998).

72.         J. Economy and C. L. Mangun. “Design of high efficiency, low cost activated carbon fiber system for removal of trace contaminants”. Book of Abstracts, 216th ACS National Meeting, Boston, August 23-27.  FUEL-099. (1998).

73.         C. Deppisch, G. Liu, A. Hall, Y. Xu, A. Zangvil, J.K. Shang, and J. Economy. “The crystallization and growth of AlB2 single crystal flakes in aluminum”. Journal of Materials Research 13(12), 3485-3498. (1998).

74.         F.F. Shi, L.A. Schneggenburger, and J. Economy. “New photoimageable dielectric insulating copolyester thin films: synthesis and characterization”. Journal of Applied Polymer Science 63(9), 1199-1211. (1997).

75.         F.F. Shi and J. Economy. “Aliphatic/aromatic copolyester thermoset adhesives: Synthesis and characterization”. Polymer Engineering and Science 37(3), 549-558. (1997).

76.         L.A. Schneggenburger, P. Osenar, and J. Economy. “Direct Evidence for Sequence Ordering of Random Semicrystalline Copolyesters during High-Temperature Annealing”. Macromolecules 30(13), 3754-3758. (1997).

77.         D. Frich, J. Economy, and K. Goranov. “Aromatic copolyester thermosets: High temperature adhesive properties”. Polymer Engineering and Science 37(3), 541-548. (1997).

78.         D. Frich and J. Economy. “Thermally stable liquid crystalline thermosets based on aromatic copolyesters: Preparation and properties”. Journal of Polymer Science, Part A: Polymer Chemistry 35(6), 1061-1067. (1997).

79.         J. Economy, D. Frich, and L.A. Schneggenburger. “LCP polyesters versus thermosetting polyesters”. A paradigm for research in 21st Century. Macromolecular Symposia 118, 11-22. (1997).

80.         C. Deppisch, G. Liu, J.K. Shang, and J. Economy. “Processing and mechanical properties of AlB2 flake reinforced Al-alloy composites”. Materials Science & Engineering, A: Structural Materials: Properties, Microstructure and Processing A225(1-2), 153-161. (1997).

81.         M.A. Daley, C.L. Mangun, J.A. DeBarr, S. Riha, A.A. Lizzio, G.L. Donnals, and J. Economy. “Adsorption of SO2 onto oxidized and heat-treated activated carbon fibers (ACFS)”. Carbon 35(3), 411-417. (1997).

82.         F. F. Shi and J. Economy. “A new photosensitive dielectric insulating polyester film: Synthesis and characterization”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 37(1), 811-12. (1996).

83.         D. Frich, K. Goranov, L.A. Schneggenburger, and J. Economy. “Novel High-Temperature Aromatic Copolyester Thermosets: Synthesis, Characterization, and Physical Properties”. Macromolecules 29(24), 7734-7739. (1996).

84.         D. Frich and J. Economy. “The role of interchain transesterification in the design of novel cross-linked polyesters”. Polymeric Materials Science and Engineering 74, 341-2. (1996).

85.         D. Frich and J. Economy.  “Effect of liquid crystallinity on adhesion at the polymer-metal interface”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 37(1), 86-7. (1996).

86.         D. Frich and J. Economy. “The role of interchain transesterification in the design of novel cross-linked polyesters”. Book of Abstracts, 211th ACS National Meeting, New Orleans, LA, March 24-28.  PMSE-202. (1996).

87.         D. Frich and J. Economy. “Effect of liquid crystallinity on adhesion at the polymer-metal interface”. Book of Abstracts, 211th ACS National Meeting, New Orleans, LA, March 24-28.  POLY-208. (1996).

88.         J. Economy, M. Daley, and C.L. Mangun. “Activated carbon fibers - past, present, and future”. Preprints of Papers - American Chemical Society, Division of Fuel Chemistry 41(1), 321-5. (1996).

89.         J. Economy andA. G. Andreopoulos. “A new concept for recycling of thermosetting resins. I: The case of crosslinkable copolyesters”. Polymers for Advanced Technologies 7(7), 561-570. (1996).

90.         J. Economy, M. Daley, and C.L. Mangun. “Activated carbon fibers - past, present, and future”. Book of Abstracts, 211th ACS National Meeting, New Orleans, LA, March 24-28.  FUEL-084. (1996). 

91.         J. Economy, C. Cofer, and D. Kim. “Liquid crystalline character in borazine oligomers”. Book of Abstracts, 211th ACS National Meeting, New Orleans, LA, March 24-28.  I&EC-118. (1996).

92.         M. A. Daley, C. L. Mangun, and J. Economy. “Low-cost activated carbon fiber assemblies for control of contaminants from air/water”. Proceedings, Annual Meeting - Air & Waste Management Association 89th, ta4b03-1-ta4b03/16. (1996).

93.         M. A. Daley, D. Tandon, J. Economy, and E. J. Hippo. “Elucidating the porous structure of activated carbon fibers using direct and indirect methods”. Carbon 34(10), 1191-1200. (1996).

94.         M. A. Daley, C. L. Mangun, and J.Economy. “Predicting adsorption properties for ACFS”. Preprints of Papers - American Chemical Society, Division of Fuel Chemistry 41(1), 326-30. (1996).

95.         M. A. Daley, C. L. Mangun, and J. Economy. “Development and characterization of activated carbon fiber assemblies”. Book of Abstracts, 211th ACS National Meeting, New Orleans, LA, March 24-28.  FUEL-085. (1996).

96.         C. G. Cofer, J. Economy, Y. Xu, A. Zangvil, E. Lara-Curzio, M.K. Ferber, and K.L. More. “Characterization of fiber/matrix interfaces in composites with a boron nitride matrix”. Composites Science and Technology 56(8), 967-975. (1996).

97.         M. P. Cal, E. D. Dimotakis, J. Economy, S. M. Larson, and M. J. Rood. “The effect of chemical modification of activated carbon cloth on the adsorption capacity of organics and water vapor”. Preprints of Papers - American Chemical Society, Division of Fuel Chemistry 41(1), 344-8. (1996).

98.         C. L. Mangun, M. A. Daley, and J. Economy. “Chemical modification of activated carbon for enhanced removal of toxic contaminants”. Proceedings, Annual Meeting - Air & Waste Management Association 88th(Vol. 4B), 95-WA77A.06. (1995).

99.         D-P. Kim, C. G. Cofer, and J. Economy. “Fabrication and properties of ceramic composites with a boron nitride matrix”. Journal of the American Ceramic Society 78(6), 1546-52. (1995).

100.      S-M. Hong and J. Economy. “Effect of annealing on the physical properties of biaxially oriented liquid crystalline copolyester films”. Macromolecules 28(19), 6481-7. (1995).

101.      J. Economy, M. A. Daley, E. J. Hippo, and D. Tandon. “Elucidating the pore structure of activated carbon fibers through direct imaging using scanning tunneling microscopy (STM)”. Carbon 33(3), 344-5. (1995).

102.      J. Economy. “The role of chemistry in materials science and engineering”. Chemistry International 17(4), 126-9. (1995).

103.      J. Economy. “Cross-linkable versus linear liquid-crystalline copolyesters”. Macromolecular Symposia 96(International Conference on Liquid Crystal Polymers, 1994), 171-2. (1995).

104.      E. D.Dimotakis, M. P. Cal, J. Economy, M. J. Rood, and S. M. Larson. “Chemically treated activated carbon cloths for removal of volatile organic carbons from gas streams: evidence for enhanced physical adsorption”. Environmental Science and Technology 29(7), 1876-80. (1995).

105.      E. D.Dimotakis, M. P. Cal, J. Economy, M. J. Rood, and S. M. Larson. “Water vapor adsorption on chemically treated activated carbon cloths”. Chemistry of Materials 7(12), 2269-72. (1995).

106.      C. G. Cofer, A. W. Saak, and J. Economy. “Carbon-boron nitride composites: An alternative to carbon-carbon”. Ceramic Engineering and Science Proceedings 16(5), 663-71. (1995).

107.      C. G. Cofer and J. Economy. “Oxidative and hydrolytic stability of boron nitride - a new approach to improving the oxidation resistance of carbonaceous structures”. Carbon 33(4), 389-95. (1995).

108.      C. W. Potter, J. C. Lim, G. Serpe, and J. Economy. “Controlling sequence distribution in copolyesters”. Prog. Pac. Polym. Sci. 3, Proc. Pac. Polym. Conf., 3rd.  271-81. (1994).

109.      Y-T.Park, N. Chiesel, and J. Economy. “Design of multilayered polymeric dielectric insulators for advanced microelectronics packaging”. Molecular Crystals and Liquid Crystals Science and Technology, Section A:  Molecular Crystals and Liquid Crystals 247, 351-63. (1994).

110.      D. Kim and J. Economy. “Occurrence of liquid crystallinity in a borazine polymer”. Chemistry of Materials 6(4), 395-400. (1994).

111.      C. Fischer  and J. Economy. “Ordering processes in polyester thermoplastic elastomers”. Polymers for Advanced Technologies 5(5), 292-5. (1994).

112.      J. Economy and K. Goranov. “Thermotropic liquid crystalline polymers for high performance applications”. Advances in Polymer Science 117(High Performance Polymers), 221-56. (1994).

113.      J. Economy and A. G. Andreopoulos. “Morphological modification of UHMPE fibers”. Polymers for Advanced Technologies 5(7), 349-57. (1994).

114.      J. Economy.  “Composites with improved compressive properties”. Report.  (1994).

115.      C. G. Cofer, D-P. Kim, and J. Economy. “Formation of an ordered boron nitride matrix for fiber reinforced composites”. Ceramic Transactions 46, 189-97. (1994).

116.      C. G. Cofer, J. Economy, M. K. Ferber, and E. Lara-Curzio. “Evaluation of the interfacial mechanical properties of fiber reinforced boron nitride matrix composites”. Ceramic Engineering and Science Proceedings 15(4), 447-55. (1994).

117.      D-P. Kim and J. Economy. “Fabrication of oxidation-resistant carbon fiber/boron nitride matrix composites”. Chemistry of Materials 5(9), 1216-20. (1993).

118.      D-P. Kim and J. Economy. “Application of a polymeric boron nitride (BN) precursor as a matrix in carbon fibers”. Ceramic Transactions 38(ADVANCES IN CERAMIC-), 47-52. (1993).

119.      O. W. Graf, K. L. Foster, M. J. Rood, S. M. Larson, and J. Economy. “Evaluation of breakthrough times for beds of activated carbon fibers adsorbing n-butane from nitrogen”. Proceedings, Annual Meeting - Air & Waste Management Association 86TH(VOL. 11A), 93MP3.05, 13pp. (1993).

120.      D. Frich and J. Economy. “Aromatic liquid crystalline polymers: properties as adhesives and protective coatings”. Polymeric Materials Science and Engineering 69, 438-9. (1993).

121.      K. Foster, O. Graf, M. J. Rood, S. M. Larson, and J. Economy. “Comparison of experimental and modeled results describing adsorption isotherms and breakthrough times for volatile organic compounds on activated carbon fibers”. Proceedings, Annual Meeting - Air & Waste Management Association 86TH(VOL. 11A), 93MP3.04, 12pp. (1993).

122.      J. Economy, D. Frich, K. Goranov, and J. C. Lim. “Crosslinkable high temperature copolyesters”. Polymeric Materials Science and Engineering 70, 398-9. (1993).

123.      J. Economy and A. G.Andreopoulos. “Factors which influence the high-temperature adhesive characteristics of liquid-crystalline copolyesters”. Journal of Adhesion 40(2-4), 115-25. (1993).

124.      J. Kachidza, G. Serpe, and J. Economy. “Ordering processing in the 2,6-hydroxynaphthoic acid (HNA)-rich copolyesters of p-hydroxybenzoic acid and HNA”. Makromolekulare Chemie, Macromolecular Symposia 53(Polym. 91:  Int. Symp. Polym. Mater.--Prep., Charact. Prop., 1991), 65-75. (1992).

125.      C. A. Fyfe, B. J. Fahie, J. R. Lyerla, J. Economy, N. Niessner, A. Muehlebach, and G. A.Facey. “Demonstration of the liquid-crystalline behavior of a rigid-backbone polyester in a magnetic field”. Macromolecules 25(5), 1623-4. (1992).

126.      K. L. Foster, R. G. Fuerman, J. Economy, S. M. Larson, and M. J. Rood. “Adsorption characteristics of trace volatile organic compounds in gas streams onto activated carbon fibers”. Chemistry of Materials 4(5), 1068-73. (1992).

127.      J. Economy, H Jung, and A. G. Andreopoulos.  “A new approach to the design of surface treatments for reinforcing agents”. Polymers for Advanced Technologies 3(7), 413-15. (1992).

128.      J. Economy, T. Gogeva, and V. Habbu. “Liquid-crystalline copolyesters as high-temperature adhesives for aluminum”. Journal of Adhesion 37(4), 215-24. (1992).

129.      J. Economy, K. Foster, A. G. Andreopoulos, and H. Jung. “Tailoring carbon fibers for adsorbing volatiles”. CHEMTECH 22(10), 597-603. (1992).

130.      J. Economy, H. Jung, and T. Gogeva.  “A one-step process for fabrication of carbon-carbon composites”. Carbon 30(1), 81-5. (1992).

131.      G. Serpe, J.  Kachidza, and J. Economy. “Solid-state forming processes for thermotropic polyesters”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 32(2), 267-8. (1991).

132.      T. E. Karis, and J. Economy. “Sol-gel route to high-Tc ceramic precursors”. Journal of Materials Research 6(8), 1623-8. (1991).

133.      H. Jung, and J. Economy. “Design of oxidation-resistant coatings for high-temperature composites”. Polymers for Advanced Technologies 2(6), 265-8. (1991).

134.      B. J. Fahie, C. A. Fyfe, G. A. Facey, A. Muhlebach, N. Niessner, J. Economy, and J. R. Lyerla. “The first demonstration of orientational order in a rigid backbone liquid crystalline polymer using deuterium NMR spectroscopy”. Molecular Crystals and Liquid Crystals 203, 127-35. (1991).

135.      A. G. Andreopoulos and J. Economy. “Thermally activated phenolic fibers”. Chemistry of Materials 3(4), 594-7. (1991).

136.      A. G. Andreopoulos and J. Economy. “Design of high-capacity, reversible polymeric adsorbents for acidic gases”. Polymers for Advanced Technologies 2(2), 87-91. (1991).

137.      A. Muhlebach, J. Economy, R. D. Johnson, T. Karis,  and J. Lyerla. “Direct evidence for transesterification and randomization in a mixture of homopolyesters of poly(4-hydroxybenzoic acid) and poly(6-hydroxy-2-naphthoic acid) above 450.degree”. Macromolecules 23(6), 1803-9. (1990).

138.      H. Jung and J. Economy. “Gas adsorption characteristics of chemically tailored carbon surfaces”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 31(2), 574-5. (1990).

139.      R. D. Johnson, N. Niessner, A. Muehlebach, J. Economy, and J. Lyerla. “Dissolution of Ekonol in trifluoromethanesulfonic acid”. Polymer Communications 31(10), 383-5. (1990).

140.      J. Economy. “Opportunities and needs in photosensitive materials”. Makromolekulare Chemie, Macromolecular Symposia 33(Int. Symp. Mol. Des. Funct. Polym., 1989), 223-31. (1990).

141.      J. Economy. “High performance materials:  trends and possibilities in liquid crystal polymers”. Angewandte Chemie 102(11), 1296-301 (See also Angew. Chem., Int. Ed. Engl., 1990, 29(11), 1256-61). (1990).

142.      J. Economy, R. D. Johnson, J. R. Lyerla, and A. Muehlebach. “Synthesis and microstructure of aromatic copolyesters”. ACS Symposium Series 435(Liq.-Cryst. Polym.), 129-41. (1990).

143.      J. Economy. “High-temperature polymers”. Frontiers of Chemistry (Columbus, Ohio) 2, 57-9. (1990).

144.      L. Quach, E. Hornbogen, W. Volksen, and J. Economy. “Structure and morphology of the 60/40 poly(p-oxybenzoate-co-ethylene terephthalate) copolymer”. Journal of Polymer Science, Part A:  Polymer Chemistry 27(3), 775-84. (1989).

145.      A. Muehlebach, J. Lyerla, and J. Economy. “Synthesis and characterization of poly(oxy-2,6-naphthalenediylcarbonyl)”. Macromolecules 22(9), 3741-6. (1989).

146.      J. R. Lyerla, J. Economy, G. Maresch, A. Muehlebach, C.S. Yannoni, and C. A.  Fyfe.  “Molecular motion in the homopolyesters of 4-hydroxybenzoic acid”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 30(2), 534-5. (1989).

147.      J. Economy, R. D. Johnson, A. Muehlebach, and J. Lyerla.  “Synthesis and microstructure of aromatic copolyesters”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 30(2), 505-6. (1989).

148.      J. Economy.  “Aromatic polyesters of p-hydroxybenzoic acid”. Molecular Crystals and Liquid Crystals 169, 1-22. (1989).

149.      A. Muhlebach, R. D. Johnson, J. Lyerla, and J. Economy.  “Diad sequence distribution in copolyesters of 4-hydroxybenzoic acid and 6-hydroxy-2-naphthoic acid”. Macromolecules 21(10), 3115-17. (1988).

150.      A. Muehlebach, J. Economy, J. R. Lyerla, C. S. Yannoni, G. Facey, C. A. Fyfe, and H. Gies.  “Solid state NMR studies of aromatic polyesters based on 4-hydroxybenzoic acid”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 29(1), 40-1. (1988).

151.      T. Karis, R. Siemens, W. Volksen, and J. Economy. “Melt processing of poly(p-oxybenzoate)”. Molecular Crystals and Liquid Crystals 157, 567-75. (1988).

152.      J. Economy, W. Volksen, C. Viney, R. Geiss, R. Siemens, and T. Karis. “The nature of the thermal transitions in poly(p-oxybenzoate)”. Macromolecules 21(9), 2777-81. (1988).

153.      W. Volksen, R. Geiss, and J. Economy. “Topotactic transitions of the tetramer of p-acetoxybenzoic acid”. Journal of Polymer Science, Part B:  Polymer Physics 24(9), 2117-22. (1986).

154.      L. Quach, W. Volksen, R. Herbold, and J. Economy. “Compositional variations in liquid-crystalline copolyesters based on p-hydroxybenzoic acid and poly(ethylene terephthalate)”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 27(1), 307-8. (1986).

155.      J. Economy. “Ordering processes in the aromatic polyesters”. Polymeric Materials Science and Engineering 52, 1-3. (1985).

156.      D. J. Dawson, W. W. Fleming, J. R. Lyerla, and J. Economy. “Thermally stable polymers for electronic applications”. ACS Symposium Series 282(React. Oligomers), 63-79. (1985).

157.      J. Tsay, W. Volksen, and J. Economy. “The role of sequence distribution on liquid crystalline properties of aromatic copolyesters”. Liquid Crystals and Ordered Fluids 4, 363-73. (1984).

158.      R. Geiss, W. Volksen, J. Tsay, and J. Economy. “Structure of poly(p-hydroxybenzoic acid)”. Journal of Polymer Science, Polymer Letters Edition 22(8), 433-6. (1984).

159.      J. Economy, W. Volksen, and R. H. Geiss. “Ordering in aromatic polyesters”. Molecular Crystals and Liquid Crystals 105(1-4), 289-303. (1984).

160.      J. Economy. “Liquid crystalline aromatic polyesters”. Journal of Macromolecular Science, Chemistry A21(13-14), 1705-24. (1984).

161.      J. Economy. “High temperature polymers for electronic devices”. Contemporary Topics in Polymer Science 5, 351-73. (1984).

162.      D. J. Dawson, W. W. Fleming, and J. Economy.  “Thermally stable polymers for electronic applications”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 25(1), 100-1. (1984).

163.      A. E. Zachariades and J. Economy. “Super strong polymers in planar directions”. Polymer Engineering and Science 23(5), 266-70. (1983).

164.      W. Volksen, J. R. Jr. Lyerla, J. Economy, and B. Dawson. “Liquid-crystalline copolyesters based on poly(p-oxybenzoate) and poly(p,p-biphenylylene terephthalate)”. Journal of Polymer Science, Polymer Chemistry Edition 21(8), 2249-59. (1983).

165.      R. H. Geiss, J. Economy, and W. Volksen. “Polymer structure determination using electron diffraction techniques”. IBM Journal of Research and Development 27(4), 321-9. (1983).

166.      A. E. Zachariades, J. Economy, and J. A. Logan. “The morphology of the aromatic copolyester of poly(ethylene terephthalate) and 80 mol % of p-acetoxybenzoic acid”. Journal of Applied Polymer Science 27(6), 2009-14. (1982).

167.      J. Tsay, W. Volksen, and J. Economy. “Preparation of poly(p-oxybenzoate) single crystals”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 23(1), 266-7. (1982).

168.      J. Economy, J. Tsay, R. H. Geiss, and W. Volksen. “Recent progress on the synthesis and properties of the aromatic polyesters of p-hydroxybenzoic acid”. Proc. IUPAC, I. U. P. A. C., Macromol. Symp., 28th.  108. (1982).

169.      J. Economy. “Structure and properties of aromatic polyesters”. Proc. China-U.S. Bilateral Symp. Polym. Chem. Phys.  221-4. (1981).

170.      J. Economy. “Now that's an interesting way to make a fiber!” CHEMTECH 10(4), 240-7. (1980).

171.      W. Volksen, B. L. Dawson, J. Economy, and J. R. Jr. Lyerla. “Melt stability of thermotropic, aromatic copolyesters”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 20(1), 86-9. (1979).

172.      J. Economy. “Polymers in new energy technologies”. Polym. Mater. Basic Res. Needs Energy Appl., Proc. Workshop.  125-30. (1978). 

173.      J. Economy. “Phenolic fibers”. Flame-Retard. Polym. Mater. 2, 203-28. (1978).

174.      V. I. Matkovich and J. Economy. “Structural determinants in the higher borides”. Boron Refract. Borides.  78-95. (1977).

175.      V. I. Matkovich and J. Economy. “Crystal chemistry of higher borides”. Boron Refract. Borides.  96-106. (1977).

176.      J. Economy and R. Lin.  “Boron nitride fibers”. Boron Refract. Borides.  552-64. (1977).

177.      J. Economy and R. S. Storm. “An ordered poly(p-oxybenzoyl) structure”. Midland Macromolecular Monographs 3(Polym. Organ. Syst.), 45-52. (1977).

178.      J. Economy. “Synthesis and properties of new reinforcing agents and superconducting filaments”. Applied Polymer Symposia 31(Fiber Sci.), 23-35. (1977).

179.      W. D. Smith, R. Y. Lin, and J. Economy. “Formation of niobium carbonitride superconductor fibers by chemical conversion of carbon fibers”. Applied Polymer Symposia 29(New Spec. Fibers), 83-92. (1976).

180.      R. Y. Lin, J. Economy, H. H. Murty, and R. Ohnsorg. “Preparation and characterization of high strength, high modulus continuous boron nitride fibers”. Applied Polymer Symposia 29(New Spec. Fibers), 175-88. (1976).

181.      R. Y. Lin, J. Economy, and H. Batha. Dean. “Preparation of boron nitride/boron nitride composites”. American Ceramic Society Bulletin 55(9), 781-4. (1976).

182.      J. Economy, R. S. Storm, V. I. Matkovich, S. G. Cottis, and B. E. Nowak.  “Synthesis and structure of the p-hydroxybenzoic acid polymer”. Journal of Polymer Science, Polymer Chemistry Edition 14(9), 2207-24. (1976).

183.      J. Economy, W. D. Smith, and R. Y. Lin. “High strength boron carbide fibers”. Applied Polymer Symposia 29(New Spec. Fibers), 105-15. (1976).

184.      J. Economy and R. Y. Lin. “Adsorption characteristics of activated carbon fibers”. Applied Polymer Symposia 29(New Spec. Fibers), 199-211. (1976).

185.      W. D. Smith, R. Y. Lin, J. A. Coppola, and J. Economy. “Preparation and properties of multifilament niobium carbonitride superconductor”. IEEE Transactions on Magnetics MAG11(2), 182-4. (1975).

186.      R. Y. Lin, W. D. Smith, J. Coppola, and J. Economy. “Preparation and properties of fine diameter multifilament niobium carbonitride superconducting fibers”. U. S. N. T. I. S., AD Rep.  (1974).

187.      J. Economy. “Kynol novoloid fibers”. Polymer News 2(7-8), 13-19. (1975).

188.      J. Economy and J. H. Mason. “Metal dicarboxylates”.  Halatopolymers. Ionic Polym.  261-80. (1975).

189.      A. A. Wosilait  and J. Economy. “Recent development in Kynol flame resistant fibers”. Proc. Symp. Text. Flammability, 2nd.  165-80. (1974).

190.      R. Y. Lin and J. Economy. “Preparation and properties of activated carbon fibers derived from phenolic precursor”. Applied Polymer Symposia No. 21, 143-52. (1973).

191.      J. Economy  and L. Wohrer. “Phenolic fibers”. Advan. Fire Retardants 3(Pt. 2), 18-30. (1973).

192.      J. Economy, L.C. Wohrer, F. J. Frechette, and G. Y. Lei. “Oxidative stability of phenolic fibers”. Applied Polymer Symposia No. 21, 81-8. (1973).

193.      J. Economy, W. D. Smith, and R. Y. Lin. “Preparation of refractory fibers by chemical conversion method”. Applied Polymer Symposia No. 21, 131-41. (1973).

194.      R. Y. Lin and J. Economy. “Thermal and oxidation properties of activated carbon fibers”. Papers presented at [the] Meeting - American Chemical Society, Division of Organic Coatings and Plastics Chemistry 32(2), 62-70. (1972).

195.      R. E. Highsmith, J. H. Mason, and J. Economy. “Boron nitride fiberboard.  New form of boron nitride”. Advan. Mater.:  Compos. Carbon, Pap. Symp.  161-4. (1972).

196.      J. Economy, R. Y. Lin, W. D. Smith, and C. K. Jun. “Development on process for producing continuous fine diameter filaments of superconductors”. U. S. Air Force Syst. Command, Air Force Mater. Lab., Tech. Rep., AFML.  (1972).

197.      R. Y. Lin and J. Economy. “Crystallite orientation in glassy carbon fiber”. Papers presented at [the] Meeting - American Chemical Society, Division of Organic Coatings and Plastics Chemistry 31(1), 403-5. (1971).

198.      J. Economy and R. Y. Lin. “Carbonization and hot stretching of a phenolic fiber”. Journal of Materials Science 6(9), 1151-6. (1971).

199.      J. Economy and L. C. Wohrer. “Phenolic fibers”. Kirk-Othmer Encycl. Chem. Technol., 2nd Ed. Suppl., 667-73. (1971).

200.      J. Economy and L. C. Wohrer. “Phenolic fibers”. Encycl. Polym. Sci. Technol. 15, 365-75. (1971).

201.      J. Economy and S. G. Cottis. “Hydroxybenzoic acid polymers”. Encycl. Polym. Sci. Technol. 15, 292-306. (1971).

202.      V. I. Matkovich and J. Economy. “Structure of MgAlB14 and a brief critique of structural relations in higher borides”. Acta Crystallographica, Section B:  Structural Crystallography and Crystal Chemistry 26(Pt. 5), 616-21. (1970).

203.      V. I. Matkovich and J. Economy. “Predictive nature of B12 polyhedral borides”. Electron Technology 3(1-2), 167-74. (1970).

204.      J. Economy and L. C. Wohrer. “Kynol--a new fire-resistant fiber”. Spinner, Weber, Textilveredlung 88(12), 1223-4. (1970).

205.      J. Economy, B. E. Nowak, and S. G. Cottis. “Ekonol:  a high temperature aromatic polyester”. SAMPE Journal 6(5), 21-7. (1970).

206.      J. Economy and V. I. Matkovich. “Crystal chemistry of higher borides”. Electron Technology 3(1-2), 159-65. (1970).

207.      J. Economy, J. H. Mason, and L. C. Wohrer. “Halatopolymers”. Journal of Polymer Science, Polymer Chemistry Edition 8(8), 2231-44. (1970).

208.      J. Economy, B. E. Nowak, and S. G. Cottis. “Tractable, high temperature p-oxybenzoyl polymer”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 11(1), 332-3. (1970).

209.      S. G. Cottis, R. S. Storm, B. E. Nowak, and J. Economy. “Reversible and irreversible thermal effects on the poly (p-oxybenzoyl) polymer above 325.deg”. Paper presented at [the] American Chemical Society, Division of Organic Coatings and Plastics Chemistry 30(2), 197-8. (1970).

210.      L. C. Wohrer, F. J. Frechette, and J. Economy. “Aerospace applications for \"Kynol\" fibers”. Aircr. Struct. Mater. Appl., Nat. SAMPE (Soc. Aerosp. Mater. Process Eng.) Tech. Conf.  83-9. (1969).

211.      J. Economy. “High performance composites.  Reinforcing agents can make fibers strong enough to withstand stringent industrial and aerospace requirements”. Chemical Engineering Progress 65(10), 46-9. (1969).

212.      J. Economy. “Recent advances in development of high performance composites”. Journal of Elastoplastics 1(Jan.), 16-30. (1969).

213.      J. Economy, L. C. Wohrer, and V. I. Matkovich. “Single crystal flake-reinforced composites”. \"Energ. Mater.\"-Energy Benefit Aerosp. Mankind, Soc. Aerosp. Mater. Process Eng., Nat. Symp. Exhib., 13th. 13, 83-92. (1968).

214.      V. I. Matkovich and J. Economy. “Tetrahedral metal groups in diiron boride and tetramanganese boride structures”. Zeitschrift fuer Kristallographie, Kristallgeometrie, Kristallphysik, Kristallchemie 126(1-6), 182-9. (1967).

215.      J. Economy and L. C. Wohrer. “Potential of whisker-reinforced plastics”. Plastics Design and Processing 7(7), 31-4. (1967).

216.      J. Economy and R. V. Anderson. “Boron nitride fibers”. Journal of Polymer Science, Polymer Symposia (19), 283-97. (1967).

217.      L. C. Wohrer and J. Economy. “Single crystal fiber reinforcements”. Adv. Fibrous Reinf. Compos., Soc. Aerosp. Mater. Process Eng. Natl. Symp. Exhib., 10th.  B69-B80. (1966).

218.      L. C. Wohrer, F. J. Frechette, and J. Economy. “Advances in whisker-reinforced plastics”. Technical Papers of the Regional Technical Conference, Society of Plastics Engineers, Cleveland Section (Sept.), 37-51. (1966).

219.      R. F. Jr. Giese, V. I. Matkovich, and J. Economy. “The crystal structure of YB4”. Z. Krist. 122(5), 423-32. (1966).

220.      J. Economy, J. H. Mason, and L. C. Wohrer. “Ionic polymers”. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) 7(2), 596-603. (1966).

221.      J. Economy and R. V. Anderson. “Properties and uses of boron nitride fibers”. Textile Research Journal 36(11), 994-1003. (1966).

222.      J. Economy and R. Anderson. “A new route to boron nitride”. Inorg. Chem. 5(6), 989-92. (1966).

223.      J. Economy, R. V. Anderson, and D. T. Meloon. “Use of boron nitride fibers in composites”. Adv. Fibrous Reinf. Compos., Soc. Aerosp. Mater. Process Eng. Natl. Symp. Exhib., 10th.  B49-B60. (1966).

224.      J. Economy. “Inorganic refractory fibers”. Kirk-Othmer Encycl. Chem. Technol., 2nd Ed. 11, 651-72. (1966).

225.      J. Economy, V. I.  Matkovich, and R. F. Jr. Giese. “Topotactical rearrangement in AlC4B24 and preparation of a new boron carbide-type structure”.  Acta Crystallographica, 20, Part 5, 697. (1966). 

226.      V. I. Matkovich, R. F. Jr. Giese, and J. Economy. “Phases and twinning in C2Al3B48 (.beta.-AlB12)”. Z. Krist. 122, 108-15. (1965).

227.      V. I. Matkovich, R. F. Jr. Giese, and J. Economy. “Packing of B12 groups in boron and boride structures”. Z. Krist. 122, 116-30. (1965).

228.      V. I. Matkovich, J. Economy, R. F. Jr. Giese, and R. Barrett. “Structure of metallic dodecaborides”. Acta Cryst. 19(6), 1056-8. (1965).

229.      R. F. Jr. Giese, J. Economy, and V. I. Matkovich. “Interstitial derivatives of .beta. boron”.  Zeitschrift fur Kristallographie, 122, 1/2, 144-147 (1965).

230.      J. Economy, D. T. Jr. Meloon, and R. L. Ostrozynski. “Supported barium chromate. A new oxidation catalyst”. J. Catalysis 4(4), 446-53. (1965).

231.      J. Economy, V. I. Matkovich, and R. F. Jr. Giese. “Crystal chemistry of .alpha.-boron derivatives”. Z. Krist. 122, 248-58. (1965).

232.      V. I. Matkovich, J. Economy, and R. F. Jr. Giese. “Presence of carbon in aluminum borides”. J. Am. Chem. Soc. 86(12), 2337-40. (1964).

233.      W. J. Bailey, E. J. Fetter, and J. Economy. “Cyclic dienes. XXVII. 1,2,4,5-Tetramethylenecyclohexane”. J. Org. Chem. 27, 3479-82. (1962).

234.      W. J. Bailey, J. Economy, and M. E. Hermes. “Polymers. IV. Polymeric Diels-Alder reactions”. J. Org. Chem. 27, 3295-9. (1962).

235.      W. J. Bailey, J. Economy, and M. E. Hermes. “Polymeric Diels-Alder reactions”. Am. Chem. Soc., Div. Polymer Chem., Preprints 1(No. 2), 1-9. (1960).

236.      W. J. Bailey and J. Economy. “Pyrolysis of esters. XIV. Synthesis of 1,3-dimethylenecyclohexane”. J. Org. Chem. 23, 1002-4. (1958).

237.      C. S. Marvel, A. T. Tweedie, and J. Economy. “Copolymerization reactions of trans-1,2-di(2-pyridyl)-ethylene”. J. Org. Chem. 21, 1420-2. (1956).

238.      C. S. Marvel, V. Sziraky, and J. Economy. “Reactivity ratios of 2-methyl-5-cinnamoylpyridine, 3-cinnamoylpyridine, and 3-pyridalacetophenone with styrene”. J. Org. Chem. 21, 1314-15. (1956).

239.      C. S. Marvel, T. H. Shepherd, C. King, J. Economy, and E. D. Vessel. “Preparation of bis(ethyl 3,5-dimethylphenoxyacetate)-4,4'-disulfide”. J. Org. Chem. 21, 1173-4. (1956).

240.      C. S. Marvel, R. W. Nowak, and J. Economy. “Further attempts to prepare 3,4-dimethylenethiophane and its sulfone”. J. Am. Chem. Soc. 78, 6171-4. (1956).

241.      C. S. Marvel, J. W. Jr. Johnson, J. Economy, G. P. Scott, W. K. Taft, and B. G. Labbe. “Copolymerization of trialkyl aconitates with butadiene and vinyl monomers”. J. Polymer Sci. 20, 437-46. (1956).

242.      C. S. Marvel, R. Potts, J. Economy, G. P. Scott, W. K. Taft, and B. G. Labbe.  “Butadiene-acrylic acid copolymers”. Ind. Eng. Chem. 47, 2221-3. (1955).

243.      W. J. Bailey, and J. Economy. “Pyrolysis of esters. III. Synthesis of 2-vinylbutadiene”. J. Am. Chem. Soc. 77, 1133-6. (1955).